GRASS VALLEY T2 Elite Service Manual Download Page 68

Page: 68 / 143

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual

May 16, 2016

Chapter 2 Maintenance Procedures

T2 Recovery Utility for T2 Elite 2/Pro 2/Express 2

T2 Recovery Utility is included in the recovery UFD for T2 Elite 2/Pro 2/Express 2.

The following operations can be performed with T2 Recovery Utility. For more

information, see the reference.

• Automatic recovery (

page 66

)

• Manual recovery (

page 69

)

• Command prompt execution (

page 70

)

• Disk formatting (

page 71

)

Starting up T2 Recovery Utility

1. Turn the T2 on.

• Turn on the power switch of the front panel.

NOTE: For T2 Elite 2, make sure that no media is inserted in the media card

reader.

NOTE: Make sure that any device other than the keyboard and mouse is not

connected to the USB port.

2. When the POST screen appears, hold down the [F7] key on the keyboard.

• The Boot Menu (Please select boot device:) appears.

3. Select the recovery UFD using the [

] or [

] key, and then press the [Enter] key.

• The "TOP" page of the "T2 Recovery Utility" screen appears.

Summary of Contents for T2 Elite
















































































































































Search results

Summary of Contents for T2 Elite

Reviews:

GRASS VALLEY T2 Elite, Service Manual, Page: 68 / 143

Search results

Summary of Contents for T2 Elite

Reviews: