manualshive.com logo in svg

GRASS VALLEY T2 Elite, Service Manual, Page: 20 / 143

Share
Download
GRASS VALLEY T2 Elite Service Manual Download Page 20

20

T2 Elite 2/Pro 2/Express 2/Elite/Pro/Express Service Manual

May 16, 2016

Chapter 1   Product Description

FRU functional descriptions

The Field Replaceable Units (FRUs) described in this section are as follows:

For procedures, refer to 

"Removing and Replacing FRUs" on page 89

.

Touch screen LCD

On the touch screen LCD, touch the screen displayed  on the LCD to perform 

operations in T2.

Refer to 

"Touch screen LCD removal" on page 113

 for procedures.

JOG/Shuttle knob

The multi-function knob provides control for JOG, shuttle and variable speed play. 

Refer to 

"Jog knob removal" on page 109

 and 

"Shuttle knob removal" on page 109

 for 

procedures. 

Button kit

Button kit consists of control buttons and Frontpanel Controller board.

Control buttons are provided for transport controls, edit controls, display controls, and 

JOG/shuttle controls and a variable speed play control. 

Refer to 

"Button kit removal" on page 116

 for procedures.

Front USB group unit

Front USB unit provides an Interconnect board, a power switch, a power on indicator, 

a headphone jack, volume control, two USB 2.0 port.

Refer to 

"Front USB group unit removal" on page 110

 for procedures. 

Recovery UFD (USB Flash Drive)

The recovery UFD contains recovery data to be restored to the factory default 

condition.

For replacement instructions, refer to 

"Recovery UFD (USB Flash Drive) removal" 

on page 112

.

Fan (Center/Rear)

The fan module provides cooling for the T2 chassis.

Refer to 

"Center fan (92 mm) removal" on page 123

, 

"Center fan (80 mm) removal" 

on page 125

 and 

"Rear fan (60 mm) removal" on page 126

 for procedures. 

Power supply unit

Power supply has a fan with automatic speed control. The power supply unit has 

protection for over voltage, over current, over temperature, and short circuits. 

Refer to 

"Power supply unit removal" on page 136

 for procedures. 

Summary of Contents for T2 Elite
















































































































































Reviews:

No comments