GRASS VALLEY SIRIUS SCR 1616-12G Installation And Operation Manual Download Page 71

Page: 71 / 77

Specifications

All Sirius Router Model Tech Specs

Sirius SCR 1616-12G Tech Specs

Ancillary Data

Passes all SDI embedded ancillary data including audio

Salvo

Up to 8 Salvos can be configured and saved in each Sirius router

Switching Modes

• Single, Dual, and Quad link modes

• Switches in vertical blanking per SMPTE RP-168

Reference Input

• External, 2x BNC

• Looping, nonterminating

• Blackburst or tri-level sync

Network Interface

• 1x RJ-45, 10/100/1000 Ethernet

• Supports Sirius Ethernet control panels, direct connect or networked

• Basic support for Grass Valley Native Protocol

• Embedded web server for remote control

USB Interface

1x Mini-USB for IP configuration using eMini-Setup*

* Earlier model devices lacking a USB port cannot be configured via

USB.

Serial Interface

• 1x DB-9 Female, RS-422

• Basic support for Grass Valley Native Protocol

• (See

RS-422 Control Specifications (Routers)

, on page 58 for pinouts.)

Environment

• Safe Operating Temperature: 0 to 40°C (32 to 104°F)

• Safe Storage Temperature (Power OFF): -40 to 60°C (-40 to 140°F)

• Operating Relative Humidity: 10-90% noncondensing

• Operating Altitude: <3,000 meters (<10,000 feet)

Video Formats

• 270 Mb/s, 1.5 Gb/s, 3 Gb/s, 6 Gb/s, 12 Gb/s SDI

• 270 Mb/s DVB-ASI

• Format agnostic, 270 Mb/s - 12 Gb/s

Video Input Digital

• 12G-SDI Inputs

• 16x 12G-SDI BNC, SMPTE-259/292/424/2081/2082

Video Output

Digital

• 12G-SDI Outputs

• 16x 12G-SDI BNC, SMPTE-259/292/424/2081/2082

• Noninverting

Summary of Contents for SIRIUS SCR 1616-12G














































































Search results

Summary of Contents for SIRIUS SCR 1616-12G

Reviews:

Related manuals for SIRIUS SCR 1616-12G

Brands by name

Popular brands

GRASS VALLEY SIRIUS SCR 1616-12G, Installation And Operation Manual

Search results

Summary of Contents for SIRIUS SCR 1616-12G

Reviews:

Related manuals for SIRIUS SCR 1616-12G

Brands by name

Popular brands