23
3
Router Web Browser User Interface
Overview
An optimized web server inside the Sirius allows you to remotely monitor and adjust
parameter settings via a network-attached computer running a web browser.
+
Note
+ ☞
Note
In this chapter SCR 3232 is used as the example. Other models will have different numbers
of buttons.
Navigation Bar
The Sirius web browser user interface (UI) provides a navigational bar of tabs for access to
control screens and the Identify toggle button:
• Home – control surface tab for salvo/source/destination selections
• Configuration – custom naming for sources and destinations, and mode selection
• Salvos – salvo configuration
• Network – IP settings for LAN/WAN operation and enabling authentication
• Firmware – update menu for Sirius software from AJA
• Alarms – log of service failures and allows alarms to be suppressed
• Identify – toggles activation of Identify LEDs for easy location of Sirius devices.
Fig. 3-1: Sirius Navigation Bar
Click any of the first six tabs to jump to that screen. To the right of the Identify button you
will see the format of the Reference Video signal being used (if present).
Sirius Home Screen Device Selection
From the Home screen (
on page 24), you can use the pull-down menu in the
upper left to see all of the Sirius devices present on the local LAN and select the one you
want to control or monitor.
Summary of Contents for SIRIUS SCR 1616-12G
Page 2: ...ii Notices ...
Page 24: ...6 Introduction In This Manual ...
Page 40: ...22 Installation Identify Button ...
