manualshive.com logo in svg

GRASS VALLEY NV9649, User Manual

Share
Download
GRASS VALLEY NV9649 User Manual Download Page 86

76

Configuration

Tally (GPIO) Window

Tally (GPIO) Window

Below the tree window is the tally section of the configuration page. 

It has two sections: inputs and outputs. By clicking on one of the input or output buttons, 
you can configure the input or output. 

(The NV9649 has no actual tally buttons. These buttons represent the DB25 connector at 
the rear. The buttons are present in the configuration page to allow you to configure the 
tally interface.)

If you are interested in configuring the tally interface, read chapter 6, 

GPIO

, on page 129.

Global Navigation 

NV9000-SE Utilities supports what are known as “global navigation” pages for NV9649 
control panels. Global navigation pages are templates

 

—

 

patterns

 

—

 

that may be used and 

reused in the creation of NV9649 configurations. 

Global navigation pages are allowed only under the LCD XY/MD model. 

There are two types of global navigation pages: ‘Suffix’ and ‘Navigate’. A navigate template 
may define a single button page or an entire subtree of pages. A suffix template is a single 
page only. The buttons allowed in a suffix template are a small subset of the buttons 
supported by NV9649 configurations. Navigate templates support all functions except 
‘Global Navigate’. That is because templates cannot be nested.

Templates themselves are 

not

 NV9649 configurations.

Take

In normal mode, a take button routes the preset source to the selected 
destination on selected level or levels. 

In salvo mode, a take button executes a selected salvo. 

A take button is disabled (and dark) until it is possible for the operator to 
execute a take. 

Configurers should provide the operator a ‘Take’ button. The button 
definition has no fields to configure. Its legend is arbitrary.

Undefined

This button type is a placeholder: during configuration, it makes the button 
undefined and inactive. On the actual panel, the undefined button remains 
unlit (dark).

Type

Description (under NV9609 Mode)

Summary of Contents for NV9649








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands