GRASS VALLEY NV9649, User Manual

Page: 69 / 167

59
NV9649
User’s Guide
Selection Typically, at least one button page should provide a set of selection buttons.
Operators press selection buttons to select levels (when the panel is in XY
mode) or to select MD devices (in MD mode). Each selection button
represents one level or one MD device.
You may configure any number of selection buttons (on any button page).
The selection buttons can be arranged anywhere on the button page.
When there are more levels, or more MD devices, than buttons on a page, the
panel enables scrolling. The operator presses ‘Page Up’ or ‘Page Down’ to
scroll through the levels or MD devices to make selections.
See Selection Buttons on page 65 for further detail.
During configuration, when you assign a selection button, a drop-down
menu appears in the button definition area: ‘Display Index’. An ‘Edit Multi-
Dest Devices’ button also appears.
The drop-down menu for the button’s display index has as many entries as
the the number of selection buttons you have defined. Choose consecutive
display indexes from 1 to the number of selection buttons on the page.
Use the ‘Edit Multi-Dest Devices’ button to define MD devices. It opens a
window in which you can define MD devices. They are assigned to selection
buttons in the order in which you define them. See
Multi-Destination
Configuration , on page 67.
 You can also obtain the MD device editing window by right-clicking the
display area of the panel graphic.
Source A source button selects a source. (Note that a quick source button selects a
source and also performs an immediate take.)
When you configure a source button, a drop-down menu appears: ‘Source
Device’. Choose a device from the list. (The ‘None’ entry is merely a
placeholder. Do not choose ‘None’.)
The button definition section also presents a “level set filter” drop-down list
in which you can select a level set to reduce the number of sources through
which to browse.
The button legend is the source name, unless you check ‘Use Custom Button
Text’ and assign the button your own text.
Type Description (under LCD XY/MD Mode)