manualshive.com logo in svg

GRASS VALLEY NV9649, User Manual

Share
Download
GRASS VALLEY NV9649 User Manual Download Page 29

19

NV9649

User’s Guide

3 Create an entirely new configuration file.

In the first and third cases, you will create a new configuration file whose name you 
designate. The file extension for an NV9649 configuration file is 

.649

. Click ‘Next’ or ‘Finish’ 

to proceed. 

Return to the ‘Control Panels’ page to view your new entry. To edit an NV9649 
configuration, either double-click its list entry or select the entry and then click ‘Edit 
Selected Control Panels’: 

You will then see the panel configuration page for the selected NV9649. 

The following section of this guide discusses using the panel configuration page in which 
you configure an NV9649.

NV9649 Panel Configuration Page(s)

The NV9649 panel can be configured to operate under 3 behavioral models:

•

‘Panel Server’ mode. 

•

‘NV9609 Panel’ mode. 

•

‘LCD XY/MD’ mode. 

(The behavioral model is selected in the first entry of the panel options. That entry is a 
drop-down list.)

The panel configuration pages for the 3 models differ greatly. The set of button functions 
differ and the panel options also differ. 

If you change the behavioral model for a configuration, the software reinitializes the 
configuration to the default (empty) configuration. Any configuration you have thus far 
created will be lost. Therefore, choose the appropriate behavioral model first. 

Summary of Contents for NV9649








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands