GRASS VALLEY NV9640, User Manual

Page: 80 / 112

70
Operation
Menu Mode
Software Versions
Press the ‘Software Versions’ button to view the software and firmware versions:
The 3 buttons on the left tell you the current versions of the software in the NV9640. Generally,
this is of no relevance unless you are in a diagnostic situation.
Press ‘Exit’ on the right to return to the menu.
User
Press the ‘User’ button to view user data:
The 2 buttons on the left tell you the user name and user ID as determined by the router control
system. These are
not the Windows user name or ID.
 User names are important in lock, protect, and release situations. The user who “owns” a lock
or protect is identified by a user name.
Press ‘Exit’ on the right to return to the menu.
Panel
Press the ‘Panel’ button to view panel data:
The 5 buttons on the left tell you the panel ID, and other useful information about the panel, in
particular, the panel’s IP address. These are useful in a diagnostic situation. This information
helps you ensure that you are sending the correct configuration file to the correct panel.

The panel acquires its IP address through DHCP on the system controller’s panel/router
network.
If the ‘Panel ID’ button is high-tally, you may change the panel ID. Normally, only your system
administrator would do that.
BOOT BOOT
SVO546- SVO546-
O4OOO2 O4OOO2
APP APP
SVOOOO- SVOOOO-
OOOOOO OOOOOO
SERVER SERVER
SVO921- SVO921-
O5 O5
• • •
EXIT EXIT
USER USER
EnvyUser EnvyUser
USER ID USER ID
O1 O1
• • •
EXIT EXIT
Panel ID Panel ID
6402 6402
PANEL PANEL
NAME NAME
D6402 D6402
IP ADDR IP ADDR
192.168. 192.168.
2.43 2.43
SVR_NAME SVR_NAME
NVCONFIG NVCONFIG
CFG FILE CFG FILE
Z6402 Z6402
• • •
EXIT EXIT