manualshive.com logo in svg

GRASS VALLEY LDK 4488 SuperXpander, User Manual, Page: 18 / 44

Share
Download
GRASS VALLEY LDK 4488 SuperXpander User Manual Download Page 18

18

LDK 4488, LDK 4489 SuperXpander/Xpander User’s Guide (v6.0)

Chapter 2  - Installation

2.2  Installing the viewfinder support

To mount a 7-inch viewfinder on top of the SuperXpander/Xpander you need to install the 
viewfinder support that was supplied with the viewfinder.

Mounting procedure

1.

Remove the camera if it is already mounted.

2.

Place the viewfinder support on top of the SuperXpander/Xpander and align the pins in the 
left and right supports with the holes in the SuperXpander. 

3.

Make sure that the support is aligned properly.

4.

Using the four Torx screws supplied, secure the viewfinder support to the SuperXpander/
Xpander (reach inside the unit and secure from underneath). 

5.

Attach the viewfinder support connector to the socket at the right front side.

6.

Use the two internal cable clamps to guide the cable along the inside of the 
SuperXpander/Xpander.

viewfinder 

support 

support (right 
side)

viewfinder 
socket

Torx screws

Summary of Contents for LDK 4488 SuperXpander













































Reviews:

No comments