2
6.15.3
LDK 4016/05 7-inch Viewfinder
User's Guide
7-inch Viewfinder
1
Red On-air Lamps
These two red tally lamps on either side of the back
of the viewfinder light when the camera picture is on-
air.
2
Power Switch
This switch is used to switch the power supply to the
viewfinder on and off. The supply to the viwfinder is
supplied from the camera. When there is no camera
power the viewfinder receives no power even thought
the power switch may be on.
3
PIP size
This switch is used to switch the size of the PIP
signal to 1/9 or 1/16 of the viewfinder picture.
4
Reset button
This button resets the PIP signal to the top left
corner of the picture.
5
PIP border
This switch is used to switch the border of the PIP
signal on and off. This switch doesn't work in the
reverse mode.
6
Aspect Ratio Switch
This switch changes the aspect ratio of the viewfinder
display. The two positions are 4:3 and 16:9 aspect
ratios.
If the viewfinder is a part of the LDK 10 camera
system, the IIC-bus will be used and switch 3 then is
disabled.
1
2
3
4
5
6