manualshive.com logo in svg

GRASS VALLEY KARRERA, User Manual

Share
Download
GRASS VALLEY KARRERA User Manual Download Page 157

KARRERA  —  User Manual

157

 

Section

 5

Device Control

Introduction

The Karrera system can control devices like DDRs, VTRs, character gener-
ators, etc., and can also control the Image Store clips and stills and GPIs to 
any external device. Karrera device control only supports devices that have 
been associated with Karrera sources. 

Note

External Devices are configured for control in the Ports & Devices, External 
Devices menu. See the 

Karrera Installation & Service Manual

 for more infor-

mation.

The following provide device control operations from the Karrera system:

•

Device Control Groups on the Control Panel,

•

Menu  Panel,

•

Karrera Menu on a PC, and 

•

The Switcher Soft Panel (KSP).

Device Control Operations

Control Groups

Device control from the Device Control Groups (one for a 2-ME Karrera 
system and two for a 3-ME), which consists of a 16 character Status Display 
(displays the current clip) and Play, Cue/Load, Next Clip, and Previous 
Clip buttons.

For the one group on the 2-ME Karrera, the Device Control Group can be 
assigned to a button row, on a 3-ME the right-most group can be assigned 
to a device associated with a source select button.

Note

Off Air Advance

 and 

Auto Start

 buttons are accessed from the Karrera menu.

Summary of Contents for KARRERA



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands