GRASS VALLEY KARRERA, User Manual

Page: 127 / 370

KARRERA — User Manual 127
Section
4
Switcher Control
Introduction
This section provides information and operating instructions for systems
used to automate control of the switcher. These systems are designed to
help you manage your workload and create effects that can be recalled with
the single push of a button.
Note Commands displayed in the OLEDs, for example “Enter”, are executed by
pressing the hard button below the command name.
Basic E-MEM Operations
The E-MEM (Effects Memory) system provides a way of storing effects for
later use. An effect defines parameter settings that determine how the
selected video sources are processed. An E-MEM effect is
learned into an
effect register , and can then be recalled at a later time with a single button
press. Effects can be edited after they have been learned, and effect data can
also be saved to and loaded from disk.
The Karrera system has 1000 E-MEM registers organized into Pages and
Banks. There are ten pages of ten banks with 100 E-MEM registers each,
that can be learned and recalled from the menu or in the Local and Master
E-MEM areas.
Register operations such as Learn and Recall can be performed in the
current page and bank or changed before selecting the desired register.
Time Value Entry
Time values are input on the Karrera Control Panel Local E-MEM and
Master E-MEM areas in seconds, frames, odd field format, using the
•
button the separator (indicated below as “
•
”
)
and pressing the hard button
below “Enter” in the display to complete the entry: