GRASS VALLEY KARRERA K-FRAME, Installation & Service Manual, Page: 106 / 278

106 KARRERA K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
The default name for every Karrera K-Frame Video Processor is
SystemA
,
and this works well when only one system is present on the network. How-
ever, if more than one Karrera K-Frame system with the default name is
present, all the Frames and Control Panels will be grouped under that
name.
If you have more than one Karrera K-Frame system, be sure to change the
name of the Video Processor Frames so you can identify them easily. When
each Frame has a unique name, the Control Panels configured with each
Frame will be grouped with that system name.
The name of a Karrera K-Frame Video Processor (and Karrera K-Frame
system name) can be changed in several ways. Once changed by any
method, any properly refreshed user display will report that changed
name. The Video Processor Frame name can be changed with:
• K-Frame Switcher Installer Program,
• Video Processor Frame web page,
• GV Switcher menu Application Frame Suite Nodes & ID menu, and
• NetConfig.
Set IP Procedure Using K-Frame Installer Program
1. Ensure the Menu Panel or PC has an IP address able to communicate
with the Karrera K-Frame system components and is physically
connected to the Karrera K-Frame network.
2. Double click on the
K-Frame Installer
icon. The K-Frame Switcher Installer
program will be launched ( Figure 69 ).
Note The K-Frame Switcher Installer program cannot run if the separate NetConfig
application or any SNMP monitoring program is also being run simultane-
ously on that same Menu Panel or PC.
3. Click on the
System
button on the left to open a hierarchy display of
Karrera K-Frame systems. Each Karrera K-Frame system consists of a
Video Processor Frame and associated Control Panel(s). Use the mouse
to navigate to the desired component (
Figure 69 ).