![GRASS VALLEY KAM-DEC-4ADC-MUX Instruction Manual Download Page 70](http://html.mh-extra.com/html/grass-valley/kam-dec-4adc-mux/kam-dec-4adc-mux_instruction-manual_2257617070.webp)
70
KAM-DEC-4ADC-MUX Instruction Manual
Software Updating
Updating Software With NetConfig
Updating from v1.0.4 to v5.0.2
For updating KAM-DEC-4ADC-MUX modules running software version
1.0.4, use the complete download procedure given next. This involves
downloading two .fld files.
For a more detailed description of this 1.0.4 update procedure and a
summary of the new functionality for the updated version 5.0.2 software
covered in this manual, also refer to the KAM-DEC-4ADC-MUX Release
Notes.
Updating from v5.0.2 and Later
If you are currently running software version 5.0.2 on your
KAM-DEC-4ADC-MUX, you will only need to do the second .fld down-
load, starting with
.
NetConfig Upgrade Procedure
Use the following procedure to upgrade using NetConfig:
1.
Copy all Kameleon software download files from the C:\temp
directory into the main NetConfig directory on your PC. This is
normally in the default location in C:\Program Files\Grass Valley
Group\NetConfig.
If you have installed NetConfig in another location, find the location of
the NetConfig directory by right-clicking on the NetConfig shortcut.
Select
Properties
and note the location in the
Start In
field. Download the
package to the NetConfig directory.
2.
In the main NetConfig directory, locate a folder named
modular
. If this
folder does not exist, create a folder called
modular
in the main
NetConfig directory.
3.
There are two .fld files available. Move the .fld files named
KAM-DEC-4ADC-MUX_5.0.2.fld and
KAM-DEC-4ADC-MUX_5.0.2_appli_only into this
modular
folder.
4.
Verify that the KAM-DEC-4ADC-MUX.sw2 file is somewhere in the
main NetConfig directory (not in the
modular
folder). This file should
not have a .txt extension or it will not work properly.
Note
NetConfig reads each .sw2 file in its main directory and navigates to the
directory given in these files to find the .fld files available. There may be a
number of .sw2 and .fld files in your NetConfig directory for other modular
products. These will not interfere with the update.