GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 74 / 346

3. Configure the settings for the network as follows:
For control network Setting...
Ethernet is required Type
Control is required Usage
None is required. This is true even on a redundant K2 SAN. (Only the
iSCSI network is redundant on a redundant K2 SAN.)
Redundancy
Control is recommended Name
Unselected is required Exclude from Host
Files
Selected is required Managed
The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required. Base IP Address
The number of IP addresses in the range managed by SiteConfig.
Required. Number of Addresses
The network's subnet mask. Required. Subnet Mask
Additional network settings managed by SiteConfig. Allowed. Gateway IP Address
Unselected is required. Related settings are disabled. Unmanaged
Servers providing DNS for name resolution. Allowed. DNS Servers
Not allowed Default Interface
Name Suffix
4. Click
OK
to save settings and close.
Modifying the FTP/streaming network
1. In the
Network Configuration | Networks
tree view, select the K2 SAN's Site node.
The networks under that node are displayed in the list view.
74 K2 SAN Installation and Service Manual 2014 01 27
Planning and implementing a K2 SAN with SiteConfig