GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 251 / 346

Specification Characteristic
Idle power: 49 W; Maximum power rating: 82 W Power
consumption
Operating: 32ºF to 131ºF (0ºC to 55ºC); Non-operating: -40ºF to 158ºF (-40ºC
to 70ºC) Temperature
Operating: 15% to 95% @ 104ºF (40ºC)
15% to 95% @ 149ºF (65ºC)
Relative humidity:
(non-condensing)
Up to 10,000 ft. (3 km) Maximum altitude
K2 Media Server description
The central component of the K2 SAN is the K2 Media Server. The Dell PowerEdge R610 and
R620 are qualified as the platform for the K2 Media Server.
The following interfaces provide K2 SAN functionality with Dell PowerEdge R610:
• Two GigE ports on the motherboard. The R610 has four GigE ports, but only two are used.
• One iSCSI interface card. A port on this card is also referred to as a TOE (TCP/IP Offload
Engine).
• One Fibre Channel card.
The following interfaces provide K2 SAN functionality with Dell PowerEdge R620:
• Broadcom Dual Port 10GbE SFP+ with two 1GbE (TOE and iSCSI offload available on 10GbE
ports)
• Fibre channel adapter: Intel I350 Gigabit Controller, Intel X450-AT2 10Gigabit Controller.
• QLogic QLE8262 Dual-Port, 10Gbps Ethernet-to-PCIe
®
Converged Network Adapter.
K2 Media Server specifications
The K2 Media Server is built on a Dell PowerEdge R610 and R620 server platform. Specifications
that are unique to it purpose as a K2 Media Server are listed in the following table. For a complete
list of specifications, refer to Dell documentation.
Dell PowerEdge R610 server
Specification Characteristic
Microsoft
®
Windows
®
Server 2008 R2 Operating System
ATTO Celerity FC-81ENSingle-Channel 8Gb/s Fibre Channel PCIe 2.0 Host
Adapter Fibre Channel
Adapter
2014 01 27 K2 SAN Installation and Service Manual 251
Description of K2 SAN Devices