Preface
About this document
This is a K2
™
product manual. It describes the K2 10Gv2 Storage Area Network (SAN) and provides
instructions for installing and using the product in a variety of applications. The manual contains
information for K2 storage in both basic (non-redundant) and redundant configurations. Refer to
the sections that apply your K2 SAN's configuration. For custom K2 SANs that do not fit one of
these pre-defined levels, you must work with your Grass Valley representative for installation and
operation.
The K2 10Gv2 SAN, and its K2 10Gv2 RAID storage, is documented in this manual. The K2 10Gv2
SAN is defined as follows: The K2 SAN with 8 Gig Fibre Channel and 10 Gig iSCSI connections.
Includes support for 2.5 inch drives and large capacity drives. Introduced in late 2012. The K2
10Gv2 SAN requires K2 software version 9.0 and higher. Some devices and/or systems used with
older K2 SANs are not compatible with the K2 10Gv2 SAN. Consult "K2 Release Notes" for
compatibility information.
For information on products that are compatible as clients to the K2 SAN, refer to those product’s
manuals, such as the "GV STRATUS Installation and Service Manual" and the "K2 FCP Connect
Installation Manual".
About documentation for previous K2 SANs
If you are looking for information about previous versions and models of K2 SAN devices, refer to
latest version of the manual published when those devices were shipped from Grass Valley, as
follows:
Manual part number
Dates shipped
Storage product name
071-8779-01
2010-2012
G10
071-8724-01
2007 - 2010
L10, L20, L30, L35
071-8461-02
2005 - 2007
L2, L3
For more information
The following sections help you find the information you need in product manuals and elsewhere.
For the installer of a standalone K2 product with internal storage
If you are installing a K2 system, such as a K2 Summit/Solo system, with standalone internal storage,
refer to documentation in the following sequence:
2014 01 27
K2 SAN Installation and Service Manual
23
Summary of Contents for K2 SAN
