GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 196 / 346

2. Do not select
Reserved Bandwidth
unless instructed to do so by Grass Valley. This system is
usually not configured for RVIO.
3. Click
Check
.
4. When the wizard reports that the configuration is correct, click
Next
.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The FTP Server Configuration page opens.
Configure FTP Server Configuration page
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4, FTP Data Socket
Timeout = 60, and FTP Port = 21. Only qualified Grass Valley personnel should specify other values,
as these settings are intended for use only with custom systems designed by Grass Valley.
1. Select MXF export type as follows:
•
377M
: Original SMPTE 377M style. Ensures compatibility with older products.
•
377-1
: Newer SMPTE 377-1 style.
Refer to related topics in "K2 System Guide" for more information.
2. Click
Next
.
The Completing the Configuration Wizard page opens.
3. Click
Finish
.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
196 K2 SAN Installation and Service Manual 2014 01 27
Configuring and licensing the K2 SAN