GRASS VALLEY K2 BASECAMP EXPRESS, Installation And Service Manual

Page: 41 / 366

Comment Instructions Task
Do not proceed until the
system description accurately
represents all aspects of the
actual system. Refer to
SiteConfig Help Topics . Use
procedures as appropriate for
your site. Modifying K2 client
unassigned (unmanaged)
interface
on page 91,
Modifying K2 Media Server
unassigned (unmanaged)
interface
on page 93
Verify/modify device
interfaces
Make sure the write filter is
disabled (device is unlocked)
on K2 Summit Production
Clients. Discovering devices with
SiteConfig
on page 96
Discover devices
— Assigning discovered devices
on page 97
Assign placeholder devices to
discovered devices
— Modifying K2 client managed
network interfaces
on page
98, Modifying K2 Media
Server managed network
interfaces
on page 103
Configure IP settings of
network interfaces on
discovered devices
— Making the host name the
same as the device name
on
page 108
Configure names
— Pinging devices from the PC
that hosts SiteConfig
on page
109
Validate networks
— Generating host tables using
SiteConfig
on page 110
Distribute host table
information
Next: Software update checklist
Software update checklist
Comment Instructions Task
— Configuring deployment
groups
on page 114
Create deployment groups
— Adding a software package to
a deployment group
on page
115
Place software on control
point PC
— Checking all currently
installed software on devices Check software on devices
Refer to K2 Release Notes.
Make sure the write filter is
disabled (device is unlocked)
on K2 Summit Production
Clients. About deploying software for
the K2 SAN
on page 116
Upgrade/install software to
devices from control point PC
02 February 2012 K2 SAN Installation and Service Manual 41
Preparing for installation