manualshive.com logo in svg

GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

The GRASS VALLEY JUPITER CONTROL PANEL L32 - Datasheet and Manual are essential resources for efficiently operating your Jupiter control system. With seamless integration and intuitive features, this panel provides precise control. Download the user manual for free from manualshive.com to unlock the full potential of this exceptional product.

Share
Download
background image

JUPITER L-S and LCD Series Control Panel Instruction Manual

173

Basic Panel Operations

 

Figure 91.  LCD16 -BPS Mode

Figure 92.  LCD48 - BPS Mode

4.

Use the Scroll wheel to see the available Sources. 

5.

Select the Sources by pressing the preferred green Source button. The 
Take request is then sent immediately to the host. 

Protection

Protecting a Destination prevents that Destination from being switched by 
other panels in the system. The protecting panel may still change the Des-
tination. The 

Protect/Lock

 button on the panel that owns the protect function 

will blink magenta if any selected Destination’s level is protected by the 
local panel. The button will illuminate solid magenta if protected by 
another panel. The panel that owns the protect function will also be dis-
played on the destination button.

Protecting a Destination

To protect a Destination:

1.

Select the Destination that you wish to Protect by pressing the button.

Note

In the Multiple Destination mode, Destinations are locked or protected on a 
per page basis.

2.

Press the 

Protect/Lock

 button in the Command buttons section once, the 

button will then turn magenta. 

Source Buttons

Destination Buttons

Source Buttons

Destination Buttons

Summary of Contents for JUPITER CONTROL PANEL L32 -

























































































































































































































Reviews:

No comments

Related manuals for JUPITER CONTROL PANEL L32 -

Quickmill E61 Assembling Instructions preview
E61
Brand: Quickmill Pages: 3
Eaton PKE-COM-RTU Instruction Leaflet preview
PKE-COM-RTU
Brand: Eaton Pages: 2
Eaton i-on30R Installation Instructions preview
i-on30R
Brand: Eaton Pages: 2
Eaton MEMSHIELD 4 Installation Instructions Manual preview
MEMSHIELD 4
Brand: Eaton Pages: 8
YOKOGAWA CX1000 Installation And Connection Manual preview
CX1000
Brand: YOKOGAWA Pages: 2
Halma ALICAT SCIENTIFIC PC Quick Start Manual preview
ALICAT SCIENTIFIC PC
Brand: Halma Pages: 2
Halma ALICAT SCIENTIFIC PCD Operating Manual preview
ALICAT SCIENTIFIC PCD
Brand: Halma Pages: 46
Lawler 801 Installation & Maintenance Manual preview
801
Brand: Lawler Pages: 4
QTP 10900 Quick Start Manual preview
10900
Brand: QTP Pages: 2
Vacon 100 HVAC User Manual preview
100 HVAC
Brand: Vacon Pages: 50
V2 Easy3 Manual preview
Easy3
Brand: V2 Pages: 116
V2 WES-BASE Manual preview
WES-BASE
Brand: V2 Pages: 8
V2 CITY2+ Instruction Manual preview
CITY2+
Brand: V2 Pages: 25
V2 CITY1-EVO Manual preview
CITY1-EVO
Brand: V2 Pages: 124
Yamaha RCX240 Supporting Supplement Manual preview
RCX240
Brand: Yamaha Pages: 92
Coris OMM-120-15 Quick Start Manual preview
OMM-120-15
Brand: Coris Pages: 4
Festool MS6-SV-...-D-10V24 Operating Instructions Manual preview
MS6-SV-...-D-10V24
Brand: Festool Pages: 32
SOMFY Situo 1 RTS Quick Installation Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 56

Brands by name

Popular brands

Load more brands