GRASS VALLEY IQUCP25, User Manual

Page: 302 / 338

302
Multiviewer SDC
Layout
Layout
The Layout template allows you to select which multiviewer video wall layout to apply to
each multiviewer head display output. You can also use a RollCall soft- or hard-panel to
remotely control which video wall layout is used.
The on-screen transition between two wall layouts is selectable; it can be:
• a simple cut; or
• a fade through black.
Video walls are designed in the Orbit application and different wall layouts may be
generated for the same wall. These are all contained within an GV Orbit multiviewer project.
• Each video wall in an Orbit multiviewer project has a Name property which is set to
Wall 1 , Wall 2 , and so on. You can edit the wall name in GV Orbit.
• Each wall layout in an GV Orbit multiviewer project has a Name property which is set to
Layout1 , Layout2 , and so on. You cannot edit this.
The wall layout to be used for each wall can be selected in the respective drop-down box of
the
Layout
template.
Fig. 9-9: Layout Template
Note: Wall layout names are case-sensitive.
Table 9-1: Layout and Controls Settings
Setting Description
Wall N: Wall number, as defined in the Orbit multiviewer project.
(1... up to 12.)
Wall name Wall name, as defined in the Orbit multiviewer project.
Outputs Head display output number(s) associated with the wall.