GRASS VALLEY IQUCP25, User Manual

Page: 116 / 338

116
Essence Processing SDC
Destination Timing
Destination Timing
The Destination Timing page allows genlock timing on each receiver spigot to be adjusted,
in order to synchronize the IP signal with the house reference.
Figure 6 - 19:
Destination Timing Page
Parameter Description
Genlock Timing V
Offset
Vertical timing offset in lines with respect to the chosen video
reference signal. See
Genlock
in Configuration on page 75.
Genlock Timing H
Offset
Horizontal timing offset in pixels with respect to the chosen video
reference signal. See
Genlock
in Configuration on page 75.
Receiver Packet
Buffer Frames
Delay
The receiver packet buffer provides additional buffering for a received
IP flow. Typically this is required where the IP flow is bursty in nature.
However, increasing buffering can affect the time required to switch
between IP flows at a spigot, owing to increased switching latency.
Adjust as required.