GRASS VALLEY INDIGO User Manual Download Page 154

Page: 154 / 174

154

INDIGO AV Mixer

User Manual

Section 10 — Maintenance

10.2 Cleaning

If the surface, Touch Screen or keys are dirty (for example, from adhesive

residue, dust, stains, or the like), remove the dirt with a clean cloth and

some rubbing alcohol or another mild cleaning agent such as window

cleaner.

Note

When cleaning, do not use cleaning agents containing solvents or cleaners

containing scouring powder or polishing particles as they may damage the

surface and the Touch Screen of your

INDIGO AV Mixer

10.3 Battery

The battery should be changed every three years, to ensure that the system

time is correct.

To change the battery:

Switch off the

INDIGO AV Mixer

Open the main fan cover at the bottom side by removing the two

screws.

Remove the old battery.

Insert the new battery.

The battery type must be

CR 2032

Close the cover and screw in the screws.

Switch on the

INDIGO AV Mixer

and set the correct system time.

Note

The menu to set the system time will be added in the next software release.

Summary of Contents for INDIGO















































































































































































Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands

GRASS VALLEY INDIGO, User Manual

Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands