GRASS VALLEY INDIGO User Manual Download

Page: 149 / 174

INDIGO AV Mixer

User Manual

149

Section

External Devices

The

INDIGO AV Mixer

offers the possibility to remotely control various

external devices, and to be controlled by linear editors via corresponding

protocols.

9.1 Players and Recorders

To remotely control players and recorders via the

INDIGO AV Mixer

, the

following protocols are supported:
•

GVG-100/200

: Supports transport functions only.

GVG-100 supports 1-M/E mixers, GVG-200 also supports 2-M/E

mixers.

•

BVW75

: Supports transport functions only.

•

AMP

: Extended Odetics protocol providing clip lists and thumbnails

(for example, to remotely control a

Turbo iDDR

9.2 Linear Editors

Using linear editors, the

INDIGO AV Mixer

can be remotely controlled.

For this purpose, it supports the GVG-100 and GVG-200 protocols.

See

External Devices Submenu

on page 143 on how to enable remote control

of the

INDIGO AV Mixer

GVG-100

This protocol offers remote control to select:
• Sources
• Transitions
• Effects

Summary of Contents for INDIGO















































































































































































Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands

GRASS VALLEY INDIGO, User Manual

Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands