GRASS VALLEY INDIGO, User Manual

Page: 147 / 174

INDIGO AV Mixer User Manual 147
Section
8
Network Operation
8.1 Purpose
The main purpose of network operation is to connect the
INDIGO AV Mixer to a network, for tasks such as remotely controlling a
Turbo iDDR that also belongs to this network.
Connect the INDIGO AV Mixer to the network via Ethernet.
Note DHCP is only working if a DHCP server is available in the network (it is NOT
a self organizing network).
8.2 Setting Up a Network Connection
To set up a network connection, do the following:
1.
Connect the LAN connector of your INDIGO AV Mixer to the
Turbo iDDR or the router via Ethernet cable.
2.
Select the SETUP main menu.
3. Select the
SYSTEM
submenu.
4.
Select Network in the Parameter Navigation Area.
5. Press
Edit...
to show the possible settings.
In an existing company network or if you use a router, press the
Dynamic DHCP button to enable dynamic address allocation.
–
or
–
Press Static IP and type in the appropriate IP Address and Sub Net
Mask
.
6. Click Apply .