manualshive.com logo in svg

GRASS VALLEY Ignite HDC Series, Instruction Manual, Page: 23 / 122

Share
Download
GRASS VALLEY Ignite HDC Series Instruction Manual Download Page 23

Ignite SDC/HDC Robotic Camera Instruction Manual

23

 

Section

 2

Installation

Unpacking

Check all parts received against the packing list enclosed with your ship-
ment, and examine the equipment for any shipping damage. Immediately 
report any missing or damaged items to the carrier and to your Grass 
Valley Service Representative (See 

Contacting Grass Valley

 on page 4

).

Keep all manuals supplied with your equipment. You will need them to 
complete the installation procedures.

Installation Procedures

General

Before you can use your Ignite SDC/HDC robotic camera, you must:

1.

Mount the robotic assembly onto a tripod (or other mounting surface).

2.

Install the optional prompter onto the robotic pan/tilt head assembly.

3.

Install the camera/lens assembly onto the prompter, or directly onto 
the robotic pan/tilt head (if the optional prompter was not purchased).

4.

Connect cables.

Summary of Contents for Ignite HDC Series



























































































































Reviews:

No comments