GRASS VALLEY Ignite HDC Series, Instruction Manual

Page: 13 / 122

Ignite SDC/HDC Robotic Camera Instruction Manual 13
Safety Summary
Operate only with covers and enclosure panels in place
— Do not operate this
product when covers or enclosure panels are removed.
Use only in dry environment
— Do not operate in wet or damp conditions.
Use only in non-explosive environment
— Do not operate this product in an
explosive atmosphere.
High leakage current may be present
— Earth connection of product is essential
before connecting power.
Cautions
The following caution statements identify conditions or practices that can
result in damage to equipment or other property
Use correct power source
— Do not operate this product from a power source
that applies more than the voltage specified for the product.
Use correct voltage setting
— If this product lacks auto-ranging power sup-
plies, before applying power ensure that the each power supply is set to
match the power source.
Do not operate with suspected equipment failure
— If you suspect product damage
or equipment failure, have the equipment inspected by qualified service
personnel.
Ensure mains disconnect
— If mains switch is not provided, the power cord(s)
of this equipment provide the means of disconnection. The socket outlet
must be installed near the equipment and must be easily accessible. Verify
that all mains power is disconnected before installing or removing power
supplies and/or options.
Route cable properly
— Route power cords and other cables so that they ar not
likely to be damaged. Properly support heavy cable bundles to avoid con-
nector damage.
Use correct power supply cords
— Power cords for this equipment, if provided,
meet all North American electrical codes. Operation of this equipment at
voltages exceeding 130 VAC requires power supply cords which comply
with NEMA configurations. International power cords, if provided, have
the approval of the country of use.
Do not disassemble the camera
— There are no user-serviceable parts inside.
Refer any servicing to qualified service personnel.
Do not abuse camera
— Handle the camera with care. Avoid striking, shaking,
etc. The camera contains sensitive components which could be damaged by
improper handling or storage.