USER MANUAL
HCO-3931 |
19
[SEL]
Gives access to the next menu level. When a parameter value is shown, pushing this button once
enables modification of the value using the [+] and [
–] buttons; a second push confirms the new value
[ESC]
Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC] causes the
parameter to revert to its former value.
Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC] does
not
exit the menu system. To exit, re-push the [SEL] button for the card being controlled.
If no controls are operated for 30 seconds, the controller reverts to its normal standby status, and the selected card’s
STATUS reverts to its normal operating mode.
To assign the local control panel to the HCO-3931:
Physical Panel:
Push the SELECT button on the HCO-3931 card edge (see Section 1.5).
Touch-screen panel: In the home screen, touch the virtual button corresponding to this HCO-3931.
The STATUS LED on the HCO-3931 flashes yellow, and the touch-screen status shows yellow for the HCO-3931.
Use the control panel buttons to navigate through the menu, as described above.
The complete menu structure is shown in
Remote control using iControl
The operation of the HCO-3931
may be controlled using Grass Valley’s iControl system.
This manual describes the control panels associated with the HCO-3931 and their use.
Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the HCO-3931 icon to open the control panel.
