GRASS VALLEY GV MATRIX, User Manual

Page: 89 / 115

73
GV Matrix
User Manual
To identify an input signal as asynchronous
1 Click Input Config and select the SDI IN tab for that input
2 Select the Video tab and view the Timing Configuration section.
3 Click the Asynchronous Input box to select it.
This input will now be considered asynchronous by the system, and processed
accordingly. XIO outputs will
not clean switch to or from this source.
Input Status
You can check the current status of the nine inputs by selecting Input Status.
Input Audio
For a complete discussion of audio (including MADI) in the XIO-4901and GV Matrix, see GV
Matrix Audio , on page 93.
Output Configuration - ASI
The Output Config panel provides resources to configure the processing of the nine signals
received from the IFM-2T fabric module before they are sent to the rear-panel outputs.
If an output has been configured for ASI output using the GV Node Manager, the tab for
that output in the Output Config panel will be labeled ASI OUT n (n = 1 through 9).
Note:
ASI output is not supported if the MDX option is enabled for the XIO-
4901 card.