manualshive.com logo in svg

GRASS VALLEY FGAEY 1312, User Manual, Page: 35 / 71

Share
Download
GRASS VALLEY FGAEY 1312 User Manual Download Page 35

MV-801 User Manual

Issue 1 Revision 1 

Page 15 

2.2  MV-800-RP Multiviewer Rear Panel (1312) (Used on MV-800/MV-801)

There are up to 12 multiviewer display outputs from the MV-801:

•

2 outputs per SDI coax or fiber SFP video module.

•

1 output per HDMI SFP video module. 

The Multiviewer display outputs come from SFP modules fitted into the SFP cages on the 
MV-801 Rear Panel module’s rear plate. SFP blanking plugs must be fitted if an SFP is not fitted 
into any of the cages. 

CAUTION

 Electrostatic Damage

Static precautions must be observed when handling, 
inserting or removing modules.

Figure 6  MV-801 Integrated Multiviewer:  a) 1312 Rear Module View;  b) Rear Connectors.

9 &10, 11 &12

Monitor Connectors 1 and 2

 

(Not currently used)

USB Connectors

(For engineering use only)

LTC & GPIO

Connector

1G Ethernet, Ports1 & 2

(“1G1”,”1G2”) 

10G Ethernet,

Ports 3 & 4

(“10G3”, “10G4”; 

Not used)

Multiviewer 

Head Display Outputs

b)

a)

Motherboard mating 

connectors

Note: 

“INSERT THIS

SIDE UP” 

label

SFP Cages for 

Ethernet SFPs

SFP Cages for 

Video SFPs

1 & 2, 3 & 4, 5 & 6, 7 & 8

Summary of Contents for FGAEY 1312








































































Reviews:

No comments