GRASS VALLEY Encore, Configuration Manual

Page: 366 / 426

366 Encore — Configuration Manual
Section 8 — Additional OUI Operations
Selecting Audio Transition Options
1. Click the
Duration
button to display the Default Duration Keypad. Enter
a value for the duration of the audio transition.
2. Click one of the six
Transition Type
buttons to select a transition.
Other Transition Options
1.
Click the
No video
button to enable or disable the video signal in a
transition.
2.
Click the
No audio
button to enable or disable the audio signal in a
transition.
3.
Click the
Split
button to display the numeric Keypad; enter a value for
the delay between the in-points of the audio and video signals in a
transition.
Available Button
Use the
Available
indicator button to mark a clip as being available for trans-
mission. Click the button to toggle it on (indicator shows green and the clip
is available), or off (indicator shows black and the clip is unavailable).
Minipic Button
Use the Minipic button to display a still of the current clip at the current time-
code. (A minipic server must be available.)
Returning to the standard LMCP layout
Click the
MCPanel
button to return to the standard Local Machine Control
Panel display.
Acquiring Media By Scanning
The Clip Assistant can acquire media by scanning barcoded tapes. Two
formats are supported: Long Sony Barcode and Odetics.
Odetics barcode format only contains the ID number of the tape on which
it is located. Thus, only the tape information will be registered by the Clip
Assistant.
Long Sony Barcode, as printed by a BVBP-12/14 barcode printer, enables
the following information to be acquired by the system:
• Tape ID,
• Tape type (e.g., Multi-segment / Single segment / Other …),
• In-Point, and
• Duration.