GRASS VALLEY Encore, Configuration Manual

Page: 353 / 426

Encore — Configuration Manual 353
Local Machine Control Panel (LMCP)
button displays the Local Router Panel; the devices are displayed as Router
Destinations. A warning message appears if no such devices are loaded.
Options Button
1. Click the
Options
button to display the Options window.
2.
Click the first button bar to select the option for creating daughter and
clone clips.
3.
Switch on the
Load virtual clip
indicator if you want to activate this option.
4. Click the
Size
button to set the default duration of a new clip.
5.
Select either the
Filer Loading
or
List Loading
option by clicking the
respective indicator buttons; an indicator shows green to highlight your
choice. (See
Filer-Fax on page 369 ).
6. Switch on the
Update Clip Options
button (so its indicator shows green), if
you want the system to update the current clip options when you
change the clip type. If you do not switch it on, the system leaves the
clip options unchanged.
7. Click the
Mode
button to select the routing option required; the selected
option is displayed in the button bar.
8. If you select Auto Mode, click the
Dest
button to display the Router
Destinations list window and select one of the available router
Destinations. The one you select is shown next to the
Dest
button. If you
select Manual Mode, the Dest button is unavailable.
9. Select
Use object database
if you want the LMCP to use the object database
— you need special system privileges to change this setting.
Figure 209. Clip Options Window
Dubbing Button
The LMCP provides a dubbing function that is only available if dubbing
servers (e.g., Transfer Manager) are configured on the Encore system. The
Dubbing Service acts as a central coordinator for the automatic transfer of