GRASS VALLEY Encore, Configuration Manual

Page: 341 / 426

Encore — Configuration Manual 341
Local Router Panel (LRP)
Assigning a Salvo to a Button
1. From the LRP select options and load
Config Mode
.
2.
Click the button to represent the Salvo.
3. Select Salvo from list and press the
Return
icon, or select
Load new local
salvo
and select, using the Filer-Fax window displayed, in the usual
way.
4.
Repeat for each Salvo you want to load.
5. Close Configuration window and LRP configuration window.
Updating Salvos
Salvos are not dynamically updated. If you change a Salvo in the router
configuration, you must update the Sharer's database manually using the
following procedure.
1. In the Router Control application, click the
Config
button on the Main
Menu.
2. Click the
Save
button in the Load Save section of the window.
3.
Click the
Commit Changes
button in the Network section (on the left) of
the window.
4.
Click the
Re-Sync Comms
button in the Hardware section (on the right) of
the window.
5. Click the Router button in the Hardware section (on the right) of the
window.
6.
Click the
Matrix
button in the Hardware section (on the right) of the
window.
Other Operations for Salvos
Clicking the
Execute Salvo
button causes all the routes defined in the Salvo to
be connected.
Clicking the Test Salvo indicator button toggles it on (button shows green),
and off (button shows grey). When the button is green, all the routes
defined in the Salvo are connected - the routes defined in the Salvo are
returned to the previous state when the button is grey.
Clicking the Delete Salvo button deletes the selected salvo.
Clicking the
Page-Down
and
Page-Up Arrow
button scrolls down and up
through the pages of routes defined in the Salvo. If the
Arrow
button is grey,
then you can scroll no further in that direction. A white
Arrow
button signi-
fies that more pages exist.