GRASS VALLEY Encore, Configuration Manual

Page: 338 / 426

338 Encore — Configuration Manual
Section 8 — Additional OUI Operations
configured for a particular purpose. Entering Config Mode offers addi-
tional functions. Typically these are only activated and de-activated by
Encore system administrators.
Accessing Config Mode Functions
1.
Click the
Option
button at the bottom of the screen.
2. Click on the
Config Mode
button. The Config Mode pane will appear.
This pane allows you to:
• Load and Save LRP config files,
• Access a Salvo builder,
• Select which Destinations appear on the LRP, and
• Activate and deactivate the Preview, Park, Mini-Pic, Alias, Salvos, and
Interlevel buttons.
Setting up LRP Destinations
1. While in Config Mode, left click on the
Destination
button you want to
configure and open the folder in the list window displayed.
2. Select the Destination from the list offered and click the
return
icon.
3. Repeat for each button you wish to set up.
4. Close the config window and the options window.
• When this pane is displayed, you can also click on grayed out function
buttons on the LRP to open an activation pane, allowing you to enable
and disable that button.
Global Routing
In Config Mode the Global pane is also displayed. Global routing provides
a quick and simple way of selecting a Destination and Source from the
entire list of those available.
Using the Global X Button to Set a Route
1. Click the Global X button to display the Router Destinations list window,
select a Destination. Once selected, this Destination then appears on the
Global X/Y
indicator button, highlighted in green.