GRASS VALLEY Encore, Configuration Manual

Page: 185 / 426

Encore — Configuration Manual 185
Output Monitoring
Selecting No Matrix Status Text
To be notified of Matrices going off line and select what status text is dis-
played (
NoMatri
x or
Undef
):
1. Log on to the Router Controller OUI and go to the
Options
screen.
2.
Turn ON the
Process matrix offline
flag.
• Turn ON the
Report NoMatrix
flag to see status as
NoMatrix
.
• Turn OFF the
Report NoMatrix
flag to see status as
Undef
.
Turn OFF the
Process matrix offline
flag to see the previously taken Source as
the status of Destinations (the previous system behavior). Figure 111 on
page 180 shows these flags on the Router Controller Options screen.
Output Monitoring
Note Before attempting to configure the Encore for monitoring, monitor wiring and
switch settings for the particular router must be understood and completed.
Please refer to the installation manual for the specific router for more infor-
mation.
A monitoring system is used to check switcher performance by switching
the output signal of interest to a quality control station. When configured
for output monitoring, the control panel will automatically switch its con-
trolled Destination to the Monitor output.
See Figure 112 .