manualshive.com logo in svg

GRASS VALLEY APEX -, Installation And Service Manual

Share
Download
GRASS VALLEY APEX - Installation And Service Manual Download Page 66

66

APEX  —  Installation and Service Manual 

Section 2 — Planning Guide

 

APX-34075-OUT frame(s). Includes 1 PS-34000 Power Supply, 1 FM-34000 
Dual Fan Module, and 1 APX-CL-35075-IN 75 Ohm License Board. Accepts 
up to 16 each input boards.

APX-35075-OUT

Apex Plus chassis, unbalanced (75 Ohm), output only. Expandable to 2048 
outputs with four (total) frames of this type. Must be used with 
APX-34075-IN frame(s). Includes 1 PS-34000 Power Supply, 1 FM-34000 
Dual Fan Module, and 1 APX-CL-35075-OUT 75 Ohm License Board. 
Accepts up to 16 each output boards.

APX-35110-IN

Apex Plus chassis, balanced (110 Ohm), input only. Expandable to 2048 
inputs with four (total) frames of this type. Must be used with 
APX-34110-OUT frame(s). Includes 1 PS-34000 Power Supply, 1 FM-34000 
Dual Fan Module, and 1 APX-CL-35110-IN 110 Ohm License Board. 
Accepts up to 16 each input boards.

APX-35110-OUT

Apex Plus chassis, balanced (110 Ohm), output only. Expandable to 2048 
outputs with four (total) frames of this type. Must be used with 
APX-34110-IN frame(s). Includes 1 PS-34000 Power Supply, 1 FM-34000 
Dual Fan Module, and 1 APX-CL-35110-OUT 110 Ohm License Board. 
Accepts up to 16 ea. output boards.

APX-PS-34000

Apex power supply 150 W, 100 to 240 VAC, 50-60 Hz. (All chassis include 
one power supply. Order this item if a redundant supply is required.)

APX-FM-34000

Apex fan module with dual fans. Order if spare module is required.

I/O Boards

APX-IN-34075

Apex Input 75 Ohm board – 32 inputs

APX-IN-34110

Apex Input 110 Ohm board – 32 inputs

Summary of Contents for APEX -





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands