manualshive.com logo in svg

GRASS VALLEY 8900NET -, Instruction Manual

Share
Download
GRASS VALLEY 8900NET - Instruction Manual Download Page 27

8900NET—Instruction Manual

27

Status Monitoring and Reporting

 

Status Monitoring and Reporting

This section provides a complete summary of frame and module status 
monitoring and reporting in a Gecko or GeckoFlex system with an 
8900NET module installed in the frame. It summarizes what status items 
are reported and how to enable/disable reporting of each item.

There are a number of ways to monitor status of frame power supplies, 
fans, modules in the frame, and other status items depending on the 
method of monitoring being used including a voltage level on the external 
Frame Alarm, module front edge LEDs, web browser indicators, and 
SNMP reporting.

Status reporting methods include the following:

•

Module Health Bus and other frame status alarm reporting to external 
Frame Alarm output on the rear of the 8900 frame,

•

LEDs on the Frame, 8900NET module, and individual frame media 
modules,

•

Web browser status reporting for each frame component, and

•

SNMP traps, captured by Thomson Grass Valley’s NetCentral or 
another SNMP Manager Application.

Note

S

NMP trap information is only available when an 

S

NMP Agent has been 

installed and configured.

Summary of Contents for 8900NET -











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands