manualshive.com logo in svg

GRASS VALLEY 7500NB, Instruction Manual

Share
Download
GRASS VALLEY 7500NB Instruction Manual Download Page 56

3-8

7500 Series Instruction Manual

Section 3 — Configuration

Signal types from the Sig column drop-down list that can be used with a 
7500WB frames are 

0 (143 MBS)

, 

1 (177 MBS)

, 

2 (270 MBS)

, 

3 (360 MBS)

, 

7 (BYPASS 

RECLOCKING)

, 

10 (540 MBPS)

, 

11 (1.485 GBPS)

, and 

12 (AUTO RECLOCKING)

. Auto 

Reclocking will automatically reclock to any of the signal rates. Bypass 
reclocking will pass any signal rate without reclocking. Selecting a signal 
rate such as 270 will set the reclocker to 270.

Individual Inputs and Outputs can be configured with different signal 
types using the 

Set Non-Default Signal Types: /CtlFlags: for Slice#

 

button number

 1

. 

Note

Switching an Input configured with one type of signal to an Output configured 
with a different signal type will cause a conflict. The conflict is resolved by the 
matrix. If either one of the signal types is Bypass Reclocking then the matrix 
will bypass reclocking. If neither one of the signal types is Bypass Reclocking 
then the matrix will auto reclock the signal.

Frame types that can be used with a 7500WB frame are either 

98 7500WB 

256X256 

or 

99 7500WB 128X128

.

VRef Override

This option in the Cfgd Node Ctrlr Window is used to enter a setting for a 
second Video Reference in the 7500WB matrices.

1.

Select 

VREF OVERRIDE?

 check box if Video Reference 2 is going to be used. 

The VRef Override is used to set 525 or 625 for Video Reference 2 and 
to assign Video Reference 1 or Video Reference 2 to each Output.

2.

Click on 

VREF OVERRIDE INFO

 to access the Vert Reference Override 

window. See 

Figure 3-7

.

3.

Assign 

1

 or 

2

 to each Output. Outputs may have different VRef signal 

types within a slice.

4.

Select 525 (NSTC) or 625 (PAL) as a setting for 

TYPE FOR REF2

.

Summary of Contents for 7500NB





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands