manualshive.com logo in svg

GRASS VALLEY 1200, Installation And Service

Share
Download
GRASS VALLEY 1200 Installation And Service Download Page 21

1-5

Model 1200 Features and Options

E-MEM Effects Memory System

■

Twenty panel-operated E-MEM

¨

 registers store and recall effects and 

transitions.

■

Storage of auto transitions as well as effects in a single register. Effect is 
recalled first, followed by the specified transition(s).

■

Built-in floppy drive saves E-MEM register contents and switcher 
configuration data to floppy disk. Also allows easy loading of software 
updates from floppy disks.

Outputs

■

All outputs are optional. Digital output options consist of submodules 
that plug into the back of the frame and are secured by screws. Analog 
output options use existing BNCs on the back of the frame.

■

Optional parallel digital or serial digital video outputs may include 
PGM 1, PGM 2, PGM KEY 1, PGM KEY 2, PVW, CLEAN FEED, AUX 
OUT 1 (SEND 1), and AUX OUT 2 (SEND 2). Submodules containing 
the output circuits and connectors plug into slots in the back of the 
frame.

■

Optional Analog Output submodules for the Program and Preview 
Mixers deliver PGM and PVW component analog outputs to existing 
frame BNC connectors. Outputs can be set by the user for YUV, RGB, or
Y/R-Y/B-Y format.

■

PGM output delay relative to reference input is 63 µs, nominal.

Miscellaneous

■

A keyboard is required to assign Signal and Crosspoint names and to 
access the menu diagnostics. Use either a keyboard acquired from 
Grass Valley (Marquardt Mini Board Keyboard #EA2452) or a standard 
PC/AT keyboard. The keyboard requires an adaptor (CA4216) which 
is included with the Model 1200.

■

Optional look-ahead preview system consists of a Preview Mixer Board 
that installs in the bottom slot in the front of the frame.

■

A built-in power supply resides inside the frame. No mounting or 
interconnection is required. The power supply provides D.C. power to 
the frame. It provides .99 Power Factor Correction in compliance with 
European requirements; prevents peaks from tripping circuit breakers 
and reduces harmonics.

■

A power supply resides inside the control panel.

■

Automatic 525/625 standard selection based on reference input. 

Summary of Contents for 1200





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands