manualshive.com logo in svg

GRAPHTEC OPS676, User Manual, Page: 9 / 35

Share
Download
GRAPHTEC OPS676 User Manual Download Page 9

9

1. Introduction to the Controller

Nomenclature (Main Screen)

You can select a tool condition suitable for the plotted media or run a test cutting or cutting 

by specifying the position of the tool and the orientation of the media. You can also display 

the help and version information of the controller or open the screen for advanced and 

optional settings.

   

Reference

 

Some of the buttons are assigned keyboard shortcuts. The shortcut keys are as follows:
• [Use Keyboard]   [F6] 

• [Origin]   [F5] 

• [Cut Test]   [F8]

1

Settings Display

Area

Displays the settings (tool, force, speed, accel, and offset) for the 

tool condition that is currently selected.

2

Tool Condition

Lists tool conditions from Condition No. 1 through 8. Click a 

condition to select it.

3

Edit Conditions

Opens the [Edit Conditions] screen.

 2. Setting Tool Conditions [CONDITION] (page 11)

4

Edit Media List

Opens the [Edit Media List] screen.

 3. Managing Media List (page 16)

5

Upload Setting to

plotter

Overwrites the condition settings (tool conditions) in the plotter by 

the settings (tool conditions) in the controller.

6

Cut Test

Runs a test cutting under the tool condition that you set.

 Test Cutting Patterns (page 15)

7

Rotate

Sets the plotting direction against the media or the direction to set 

the media printed by the printer in the plotter.

 Selecting Rotation (page 10)

8

Registration Marks 

Setting

Used for a cutting where the registration mark is scanned.

 7. ARMS Setting [ARMS] (page 23)

9

(TOOL)

Opens the [Tools Setting] screen.

 4. Tools Setting [TOOL] (page 18)

10

(ARMS)

Opens the [ARMS Setting] screen.

 7. ARMS Setting [ARMS] (page 23)

11

(AREA)

Opens the [Area Parameters] screen.

 5. Setting Area Parameters [AREA] (page 20)

12

(MEDIA)

Opens the [Media Setting] screen.

 8. Media Setting [MEDIA] (page 27)

13

(I/F)

Opens the [Interface] screen.

 6. Interface Setting [I/F] (page 22)

14

(ADV.)

Opens the [Advance] screen.

 9. Advance [ADV.] (page 29)

15

Cancel*

1

Cancels the setting and closes the controller.

16

Cut*

1

Cuts the media based on the settings you made.

17

Close*

2

Cancels the setting and closes the controller.

18

Option

Open the [Option] screen. It is able to check the error data and 

conditions of the Plotter main unit, and also to import/export the set 

content.

 10. Option Settings (page 30)

19

About...

Displays the version information of your controller.

23

2

1

7

22

20

19

10

13

8

14

15 16 17

18

21

12

11

5

6

9

3
4

Summary of Contents for OPS676




































Reviews:

No comments