manualshive.com logo in svg

GRAPHTEC OPS676, User Manual, Page: 32 / 35

Share
Download
GRAPHTEC OPS676 User Manual Download Page 32

32

11. Simple mode

Option screen

Select the printer driver, and then set the destination.

1

Driver (Select)

Selects the Plotter to be set on the controller. Select the plotter 

driver you want to set from the "Select" pull-down list.

2

Tool Condition

Returns the cutting conditions and media name set to the Plotter to 

the default settings.

3

OK

Communicates with the printer driver related to CE6000.

4

Cancel

Closes this screen without changing the destination, returns to the 

original settings.

Register screen

This screen allows the cutting conditions to be saved, deleted, or loaded.

1

Folder name

Indicates the destination to save the cutting conditions.

2

Browse

Specifies the folder to be saved.

3

List

The cutting conditions saved in the file are listed up.

4

File name

The name of the file in which the cutting conditions are set is indicated. 

When the cutting condition file displayed in the List is selected, the 

name is indicated.

5

Save

Saves with the name specified in the File name.

6

Delete

Deletes the file selected in the List.

7

Load

Loads the settings within the file selected in the List, and then closes 

this screen.

8

Close

Closes this screen without changing the settings.

3

4

1

2

5

6

7

8

2

4

3

1

Summary of Contents for OPS676




































Reviews:

No comments