2
Cutting Plotter Controller
OPS664
Software Usage Agreement
Graphtec Corporation ("Graphtec") hereby grants the purchaser and authorized User
(the "User") the right to use the software (the "Software") in accordance with the terms
and conditions specified. By its purchase and use of the Software, the User hereby
accepts and agrees to abide by the terms and conditions set forth herein.
1. Copyrights
All copyrights relating to the Software and accompanying printed materials such as
manuals shall be retained by the individuals or organizations indicated in the Software
or printed material.
2. License
The User may use the Software on one computer at a time.
3. Copying and modification
(1) The User may copy the Software for backup purposes.
In that case, the User should label the copy with the same copyright notices as
apply to the Software.
(2) The User may not modify, combine, amend, or otherwise adapt the Software by
any means, including disassembly and decompiling.
4. Third-party use
The User may not transfer, assign, or otherwise dispose of the rights relating to the
Software or its use to third parties.
5. Warranty
(1) Should the Software not operate correctly due to physical defects in the Software
storage medium, contact your retailer. The product will be exchanged free of
charge in the case of a physical manufacturing defect.
(2) Graphtec only guarantees the storage medium under the above situation.
(3) Graphtec provides the Software on an "as is" basis. Neither Graphtec nor the
supplier guarantees the performance or results that may be achieved using the
Software and accompanying documentation. Neither Graphtec nor the supplier
gives any explicit or implicit guarantees regarding the infringement of a third
party's rights arising from the use of the Software or accompanying manuals,
their commercial performance, or their suitability for specific purposes. Neither
Graphtec nor the supplier assumes any responsibility for incidental, secondary, or
special damages resulting from the use of the Software or accompanying manuals
under any circumstances, including cases in which the possibility of that particular
damage arising is indicated to the User by the retailer. Moreover, neither Graphtec
nor the supplier assumes any responsibility for claims from third parties.
Registered Trademarks
(1) The company names and product names described in this manual are registered
trademarks of their respective owners.
(2) The "OPS664" software and this manual are copyrights of Graphtec Corporation.
Notes on this Manual
(1) The contents of this manual may not be copied in part or in whole without
permission.
(2) The details and product specifications in this manual are subject to change
without notice.
(3) The greatest effort has been taken to ensure the clarity and accuracy of the
information in this manual. Please contact Graphtec or your retailer with any
questions you may have.
(4) Please note that Graphtec assumes no responsibility for any liabilities arising out
of the use of this manual and product.
Disclaimer
Some of the software images used in this manual are those that were used when the
software was under development, and they may be slightly different from those actually
displayed. There are no differences between the functions and setting layouts shown
here and those of the actual version. We ask for your understanding.
