1
Paper is jammed in the Suction belt unit
When paper jam occurs, the message is displayed on the control panel, and then the
printing operation is shut down.
When the paper is jammed, inspect each part in the following procedure and remove
the jammed paper.
♦ CAUTION ♦
• When removing jammed paper, please remove all pieces of paper so as not to leave inside the
printer.If pieces of paper are left, it may cause a fire.
When it is hard to remove a piece of paper by reason that it is wrapped around the fusing part
and the roller, please do not force to remove it.This may cause injury.
Please turn off the power immediately, contact the distributor you purchased or our customer
center.
• The fusing part has become heated to a high temperature in operation or immediately after
operation.Please be careful burns.Please do the work when the fusing part is cold enough.
• Please do not force to remove the paper jammed when it is hard to see the parts or not able to
see.Doing so forcibly may result in injury.
Please contact the distributor you purchased or our customer center.
• Paper is jammed in the Suction belt unit
When paper is jammed in the Suction belt unit, the paper jam location is displayed on
the control panel and then the printing operation is shut down.
Inspect the parts and remove the jammed paper in the following procedure.
1
Turn OFF the printer.
2
Disconnect the power cable from the electrical outlet.
