LCX603-UM-651-9370
2-92
2 Setup
2.26 Setting the Frame Cut
This setting to use or not use frame cut (outline cutting).
When frame cut is set to "ON", cut the outline conforming to the indicated plotting area in the printer driver
when printing/cutting.
Frame Cut
Residue removal may become difficult in the separator unit depending on the configuration of the labels
being produced or label material type (25 μm materials or paper-type materials).In such cases you will
have to peel with your hands, but insert a cutting line in the outline of the sheet and remove excess residue
in the separator unit. Horizontal cutting afterward will become smooth as a result.
Feeding
direction
Start mark
Frame cut
In sequence number creation application software, etc., there is a function that lays out sequence numbers
or bar codes in the sheet by designing single layer labels. However, they are conversely not able to
indicate a cutting line for outline cutting. As such, the LCX603 will match the paper size and cut the outline.
How to set the frame cut
Confirm the frame cut setting is set to the “OFF” this time.
(1) Press the LOCAL Key in READY status, the following menu is displayed.
PRINTER MENU>
CUTTER MENU>
OUTPUT ALL>
(2) Press the F1 Key (PRINT MENU), the following menu is displayed.
COPY>
DATA CLEAR>
CONDITION>
1/4
Summary of Contents for LABELROBO LCX603
Page 2: ......
