manualshive.com logo in svg

GRAPHTEC GLT400, User Manual

Share
Download
GRAPHTEC GLT400 User Manual Download Page 93

4-3

CHAPTER 4  Settings and Measurement

(3) Software installation

This software is stored in the internal memory of the GLT400 in advance. After copying it to the PC in USB 

drive mode, It can be installed. Also this software can be downloaded from our website.

<Installation in USB drive mode>

(1)  Set the mode switch to "USB DRIVE" when the power of the GLT400 is off.

(2)  Connect between the GLT400 and PC with a USB cable (A-B type cable).
(3)  Turn on the power of the GLT400.
(4)  The internal memory of the GLT400 is displayed as the "USB drive" on the PC.

(5)  Copy the Manuals_Applications folder to the PC.
(6)  Execute Manuals_Applications 

→

 GLT400SettingApp 

→

 Setup.exe in the copied folder.

(7)  After that, follow the installer's instructions to install.

● The control software GL-Connection is also included in the Manuals_Applications folder. If you want to 

use the GL-Connection, install it as well.

● If the Manuals_Applications folder in the GLT400 is not necessary, you can delete it.
● When this software is installed on the PC in which the Microsoft .NET Framework 4.6.1 is not installed, the 

online installer of .NET Framework 4.6.1 starts when the installer starts. Follow the installer’s instructions 

to install. When not connected to the network, execute dotnetfx46_full_x86_x64.exe in the copied 

Manuals_Applications folder to install.

<Download and install from our website>

Download "GLT400 Setting App" from "Measuring Instrument"-> "Data logger" at the following URL.
  http://www.graphtec.co.jp/site_download/index.html 

Unzip the downloaded file, start it and follow the installer's instructions to install.

Summary of Contents for GLT400































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands