3-6
CHAPTER 3 Operation and Function
3.3 Operation of LED
This section describes the operation of the LED.
(6) LAN connector
(5) SD ACCESS
(1) POWER
(2) START
(3) ALARM
(4) ACCESS
(1) POWER
This LED is lit in three colors: green, orange, and red. It mainly indicates the power supply status and error
occurrence status.
Mode Switch status
Lighting status
Description
STAND-ALONE / REMOTE
Not lit
Power off status
Lit in green
When started up
Flashes in green
Starting up/Reading setting file
Flashes in green
SD CARD can be replaced (During capturing)
Flashes in orange
SD CARD replacement is in preparation
Lit in red
Error occurred
USB DRIVE
Lit in orange
Operating in USB DRIVE mode
(2) START
This LED is lit in two colors: green and orange. It mainly indicates the capturing status
Mode Switch status
Lighting status
Description
STAND-ALONE / REMOTE
Not lit
Capturing stop (During free running)
Lit in orange
Waiting for start trigger
Lit in green
Capturing
Flashes in orange
Capturing finished (Stop trigger is established), Waiting for repeat
capturing
USB DRIVE
Always not lit
Not used
