3-131
CHAPTER 3 Settings and Measurement
Setting
Description
Span
Set the Span.
You can set it when the analog CH in the Span mode is set to
the axis.
Run All Data XY
Execute XY display for all data.
* When the amount of data is large, it may take time to draw
XY graph.
Run Cursors XY
The data of the section sandwiched between cursors AB is
XY-displayed.
* When the amount of data is large, it may take time to draw
the XY graph.
XY replay
Setting
Description
Set XY Display
Perform settings for XY display.
CH
Set X-axis and Y-axis of XY graph.
CH1 to CH8
Trace
Set the trace of XY graph.
Off, On
Waveforms are not displayed on the screen when trace is set
to Off. They are also not displayed on the digital display.
Position
Set the XY position.
0 to 100%
Vernier
Set the XY Vernier.
40 to 100%
* The range varies depending on the range setting.
Span
Set the Span.
You can set it when the analog CH in the Span mode is set
on the axis.
Reflect XY display settings
The XY graph with the contents of XY display settings is
redrawn.
* When the amount of data is large, it may take time to draw.
XY Overwrite
Set the XY overwrite.
Select File
Select the image file to be overwritten and execute
overwriting.
Overwrite clear
The XY overwrite is cleared and completed.
Return to Y-T waveform screen
The data being replayed is changed to Y-T display.
(8)-1 Move to selected position
Set the position (relative time with the trigger point set as 0) or the time and then move the current selected
cursor (A or B) to the position.
< Position >
< Time >
(8)-2 Cursor synchronization
Set function that move two cursors in synchronization.
Setting
Description
Off
Cursors are not synchronized. Only the specified one cursor moves.
On
Two cursors move in synchronization.
* Cursor Synch is turned Off when you move a cursor using the Move to Selected Position or perform Data Search.
