GRAPHTEC FC5100A-100, User Manual

Page: 188 / 201

Options: FC5100A Stand Manual
188
Stand Assembly
The following information will give you step-by-step instructions on how to
assemble the Stand for the GRAPHTEC FC5100A Cutting Plotter. For best
results, follow all instructions carefully.
A
SSEMBLY
A
REA
Assemble the Stand on a secure, flat surface. You will be using the Hex Key
Tools provided with your Stand assembly.
1 Lay one stand side horizontally and attach the right base assembly to the stand
side with four socket head cap screws A using the L wrench hex key tool A.
Repeat this step with the other side.
2 Lay the middle bar horizontally and attach it to one stand side with two socket
head cap screws B using the L wrench hex key tool B. Repeat this step with
the other side.
Socket head
cap screw A
Stand side
Base assembly
Socket head
cap screws B
Socket head
cap screws B
Middle bar
Stand sides