GRAPHTEC FC5100A-100, User Manual

Page: 146 / 201

Background Settings: Background Settings for HP-GL
146
• Press the ENTER key to register your setting and to proceed to the next menu.
Press the NEXT key if you wish to bypass this setting with no changes.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
Media Sensor
Control
This function allows you to disable the media length sensor function which is
performed after selecting the media type during the plotter’s initialization.
When
ENABLED is selected, the media length sensor will perform. When DISABLED is
selected, the media length sensor will not perform.
In cases where the media length sensor function is disabled, the pen carriage
may go beyond the edge of the media.
CAUTION: Always set the AREA function to limit the cutting area and protect the machine.
• Press the F3 key to select ENABLED or press the F4 key to select DISABLED. A
blinking cursor appears beside your choice.
• Press the ENTER key to register your setting and to proceed to the next menu.
Press the NEXT key if you wish to bypass this setting with no changes.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
MEDIA SENSOR
ENABLED .
DISABLED .
MEDIA SENSOR
ENABLED .
DISABLED .
PINCH ROLLER SENSOR
ENABLED .
DISABLED .