GRAPHTEC CE7000-130AP, User Manual

Page: 5 / 260

III
Special Precautions on Handling Blades
Sharp cutter blades are used with this plotter. Handle the cutter blades and holders with care to prevent bodily
injury.
Cutter Blades
Cutter blades are very sharp. While handling a cutter blade or cutter pen, be careful to avoid cutting your fingers
or other parts of your body. Promptly return used blades to the cutter case provided.
Blade tip
For the used blade, put it in the supplied cutter blade case and discard them in accordance with the local
regulations.
Cutter plungers
The tip consists of a sharp blade. Be sure not to extend it too far. Moreover, when you are not using the cutter
plungers, make sure that the blade is fully retracted.
Cutter blade
After Mounting the Cutter Plungers
After the power has been turned on, and during operation, do not touch the pen tip. It is dangerous.